|
|
Industrial Scales & Process Weighing, Test Stands, Torque & Force Measurement Gages, Laboratory Balances & Equipment
Services Include: Calibration / Repair / Validation / Installation & Commissioning / Weight Verification (Nationwide) |  |
|
GSE_GSE ITA-25k_ITA-25k
by
GSE_GSE ITA-25k_ITA-25k
, Tester at Scale Reviews
The ITA is an innovative self-contained low profile weighing assembly that integrates the mounting assembly and load cell. The ITA design allows up to a 3 degree off axis angle with no effect on weighing accuracy. The durable stainless steel hermetically sealed construction prevents intrusion from moisture or chemicals, providing years of service in the most hostile environments. Integral to the ITA design is Uplift Restraint and Side Load protection, eliminating the ned for check rods or stabilizing hardware on most applications. Full scale putput: 3 mV/V nominal. Linearity: +/- 0.2%. Repeatability: +/- 0.05%. Bridge Resistance: 350 ohm nominal. Operating temp: 10-110 F (-12 to 43 C). Safety Overlad: 150% F.S. Seal Type: Hermetic, IP66 / IP68. Calibration: Software using Actual mV/V or Calibration Weight. Constrauction: All Stainless Steel. Cable Length: 25 feet, 4-Cond. Shielded. Approvals: Ntep (pending), Factory Mutual - FM. Capacity: 25k
5 out of 5.
GSE_GSE ITA-25k_ITA-25k
The ITA is an innovative self-contained low profile weighing assembly that integrates the mounting assembly and load cell. The ITA design allows up to a 3 degree off axis angle with no effect on weighing accuracy. The durable stainless steel hermetically sealed construction prevents intrusion from moisture or chemicals, providing years of service in the most hostile environments. Integral to the ITA design is Uplift Restraint and Side Load protection, eliminating the ned for check rods or stabilizing hardware on most applications. Full scale putput: 3 mV/V nominal. Linearity: +/- 0.2%. Repeatability: +/- 0.05%. Bridge Resistance: 350 ohm nominal. Operating temp: 10-110 F (-12 to 43 C). Safety Overlad: 150% F.S. Seal Type: Hermetic, IP66 / IP68. Calibration: Software using Actual mV/V or Calibration Weight. Constrauction: All Stainless Steel. Cable Length: 25 feet, 4-Cond. Shielded. Approvals: Ntep (pending), Factory Mutual - FM. Capacity: 25k
GSE_GSE ITA-25k_ITA-25k
SC-1816
GSE_GSE ITA-25k_ITA-25k
The ITA is an innovative self-contained low profile weighing assembly that integrates the mounting assembly and load cell. The ITA design allows up to a 3 degree off axis angle with no effect on weighing accuracy. The durable stainless steel hermetically sealed construction prevents intrusion from moisture or chemicals, providing years of service in the most hostile environments. Integral to the ITA design is Uplift Restraint and Side Load protection, eliminating the ned for check rods or stabilizing hardware on most applications. Full scale putput: 3 mV/V nominal. Linearity: +/- 0.2%. Repeatability: +/- 0.05%. Bridge Resistance: 350 ohm nominal. Operating temp: 10-110 F (-12 to 43 C). Safety Overlad: 150% F.S. Seal Type: Hermetic, IP66 / IP68. Calibration: Software using Actual mV/V or Calibration Weight. Constrauction: All Stainless Steel. Cable Length: 25 feet, 4-Cond. Shielded. Approvals: Ntep (pending), Factory Mutual - FM. Capacity: 25k
http://www.scalepeople.com/ui/SubProductDetails/GSE_ITA_25k_ITA_25k_659.aspx
/Products/images/thm/thm1_ita.jpg
GSE_GSE ITA-25k_ITA-25k
SC-1816
GSE_GSE ITA-25k_ITA-25k
The ITA is an innovative self-contained low profile weighing assembly that integrates the mounting assembly and load cell. The ITA design allows up to a 3 degree off axis angle with no effect on weighing accuracy. The durable stainless steel hermetically sealed construction prevents intrusion from moisture or chemicals, providing years of service in the most hostile environments. Integral to the ITA design is Uplift Restraint and Side Load protection, eliminating the ned for check rods or stabilizing hardware on most applications. Full scale putput: 3 mV/V nominal. Linearity: +/- 0.2%. Repeatability: +/- 0.05%. Bridge Resistance: 350 ohm nominal. Operating temp: 10-110 F (-12 to 43 C). Safety Overlad: 150% F.S. Seal Type: Hermetic, IP66 / IP68. Calibration: Software using Actual mV/V or Calibration Weight. Constrauction: All Stainless Steel. Cable Length: 25 feet, 4-Cond. Shielded. Approvals: Ntep (pending), Factory Mutual - FM. Capacity: 25k
|
|
Provided by the Scale People Inc. has been in business since 1956. www.scalepeople.com.
Price: 1099 USD
Product Name:
GSE ITA-25k
Description: The ITA is an innovative self-contained low profile weighing assembly that integrates the mounting assembly and load cell. The ITA design allows up to a 3 degree off axis angle with no effect on weighing accuracy. The durable stainless steel hermetically sealed construction prevents intrusion from moisture or chemicals, providing years of service in the most hostile environments. Integral to the ITA design is Uplift Restraint and Side Load protection, eliminating the ned for check rods or stabilizing hardware on most applications. Full scale putput: 3 mV/V nominal. Linearity: +/- 0.2%. Repeatability: +/- 0.05%. Bridge Resistance: 350 ohm nominal. Operating temp: 10-110 F (-12 to 43 C). Safety Overlad: 150% F.S. Seal Type: Hermetic, IP66 / IP68. Calibration: Software using Actual mV/V or Calibration Weight. Constrauction: All Stainless Steel. Cable Length: 25 feet, 4-Cond. Shielded. Approvals: Ntep (pending), Factory Mutual - FM. Capacity: 25k
EAN/UPC code: ITA-25k
Article number: ITA-25k
|
